MP2 Double Picture Synthesizer / Double Picture Partition  Operating Instructions
   
    The double picture synthesizer / partition front panel as chart shows, from left to right which keys respectively are the power switch, the LCD fluid crystal display and control keying. After opening computer, the top line of LCD display displays the current picture partition mode (DOUBLEVIEW A/DOUBLEVIEW B). DOUBLEVIEW A is the level compressional double picture synthesis mode. DOUBLEVIEW B is the level normal double picture synthesis mode. Following line displays the loop switch station (AUTO ON/AUTO OFF). The under right digit of the liquid crystal display is the loop switching fixed time. It can be set by time adjusting key (1～255 seconds).

　　　           

                         

                                       MP2 effect chart

　

The front of panel has 7 keys, which from left to right in turn are

Mode1: After pressing down the key, TV exports the level compressional panoramic double picture

Mode2: After pressing down the key, TV exports the normal double picture

1: After pressing down the key, video output 2 is switched for video 1

2: After pressing down the key, video output 2 is switched for video 2

Auto SW: After pressing down the key, output automated switches between video 1 video 2 in fixed time
：The key can adjust the loop switching time interval (1 to 255 Seconds)

Double picture synthesizer/partition rear panel following chart :

 　　

OUT1 is the fixed double picture synthesis output, OUT2 is the switching single picture 1 or 2.
【Technical specification】

    Input: 2 channel video, 1Vp-p, 75Ω

    9bit quantification two lines of honeycombs filter

    Two lines of honeycombs filter

    Output: 2 channel, 1Vp-p,75Ω