DM88
SDI (ASI) Digital Matrix
DM88
is SDI (ASI) form digital video matrix. It may select 4X1,
4X2, 4X3, 4X4,8X1, 8X2, 8X4, 8X8 modes according to the user
requests.
〖Front
panel〗
On
the front panel A-B eight keys use in selecting the output channel
and displaying content corresponding with liquid crystal board
"OUTPUT line". When selecting some channel output, it
corresponds the letter
glittering. 1-8 uses in selecting the input and displaying
content corresponding with liquid crystal board "INPUT
line".
When
selecting the B output channel, and input selecting the seventh
way,
liquid crystal displays as follows:
〖Rear
panel〗
Among
COM:
232 strings ports, it joints the computer string port to use the
computer common control
REF-IN:
The datum video frequency loses the entrance (link to leave)
INPUT1-8:
Corresponds 1-8 channel SDI signal input
OUTPUT1-8:
Corresponds 1-8channel SDI signal output
220V
1A: The alternating current supply connects the socket
[
DM88 digit matrix technology parameter ]
Video
input: 143-360Mbits/Second serial digital data
Video
frequency interface: BNC 75Ω
Input
equilibrium: UP to 200m (Belden 8,281)
Video
output: 143-360Mbits/ Second serial digital data un-reclock
Output
interface: BNC 75Ω
Output
signal level: 800mv pk-pk±5%
Vibration:
<100ps RMS direct<250ps RMS with 200m cable
Operating
temperature: 0-40 ℃
1U
standard top carriage case
[
String port communication protocol ]
The string port communication baud rate is 2,400, the single byte
command code (8bbits), a
bit starts the position, a bit of stop bit, first half byte
selection input channel, latter half
byte selection output channel, definition following table:
Channel quantity
input/Output |
Input control code (binary system)D7 D6 D5
D4 |
Output control code (binary system)D3 D2 D1
D0 |
| 1/A |
0 0 0 0 |
0 0 0 0 |
| 2/B |
1 0 0 0 |
1 0 0 0 |
| 3/C |
0 1 0 0 |
0 1 0 0 |
| 4/D |
1 1 0 0 |
1 1 0 0 |
| 5/E |
0 0 1 0 |
0 0 1 0 |
| 6/F |
1 0 1 0 |
1 0 1 0 |
| 7/G |
0 1 1 0 |
0 1 1 0 |
| 8/H |
1 1 1 0 |
1 1 1 0 |
According
to above protocol, if output selects the B channel, the input
selects 7 channel, then the control code is 68Hex.
|